Repair information 4-113
7562
OP panel speaker removal
See “Front, right, and top covers” on page 7-3 for the part number.
For the removal procedure, see “OP panel bottom cover removal” on page 4-22.
OP panel UICC card removal
See “Front, right, and top covers” on page 7-3 for the part number.
1. Remove the OP panel assembly. See “Operator (OP) panel assembly removal” on page 4-107.
2. Disconnect all the cables from the UICC card, and remove the four screws (A) to remove the card.