Lexmark X792 - ADF Turn Guide Removal

4-202 Service Manual
7562
Go Back
Previous
Next
ADF turn guide removal
See “ADF covers” on page 7-23 for the part number.
1. Remove the ADF pinch roll assembly. See “ADF pinch roll assembly removal” on page 4-192.
2. Remove the ADF feed/pick roll assembly. See “ADF feed/pick roll assembly removal” on page 4-183.
3. Remove the two screws (A) from the front of the ADF unit assembly.
4. Using a flat-blade screwdriver, unfasten the three hooks securing the separator guide to the turn guide,
starting with the center hook.
5. Pivot the turn guide out from the front side, giving room to dislodge the pins from the rear.
6. Remove the ADF turn guide.
A