Lexmark X792 - AIO top cover removal

Repair information 4-5
7562
Go Back
Previous
Next
AIO top cover removal
See “Front, right, and top covers” on page 7-3 for the part number.
1. Remove the lower scanner cover. See “AIO lower scanner cover removal” on page 4-212.
2. Remove the printhead access cover. See “Printhead access cover removal” on page 4-22.
3. Remove the front access door assembly. See “Front access door assembly removal” on page 4-9.
4. Remove seven screws (A), and then remove the frame arm.
5. Remove two screws (B) from the front.
A (88A0212)
B (88A0323)