4-306 Service Manual
7562
2000-sheet high-capacity feeder right anti-tip latch assembly removal
See “Optional 2000-sheet high-capacity feeder” on page 7-35 for the part number.
1. Remove the rear cover. See “2000-sheet high-capacity feeder rear cover removal” on page 4-304.
2. Remove the right side cover. See “2000-sheet high-capacity feeder right side cover removal” on
page 4-308.
3. Remove the two screws (A) securing the right anti-tip latch assembly to the drawer.
Note: Hold the right anti-tip latch assembly to prevent it from falling off after removing the screws.
This is the photo of the right anti-tip latch assembly.
To Next Page
Loading...
