Lexmark X792 - Lubrication specifications; Lubrication for replacement motors; Redrive parts packet

6-2 Service Manual
7562
Go Back
Previous
Next
Lubrication specifications
Lubricate only when parts are replaced or as needed, not on a scheduled basis. Use of lubricants other than
those specified can cause premature failure. Some unauthorized lubricants may chemically attack
polycarbonate parts.
The motor drive FRUs contain the proper lubricant in the FRU. Use only the lubricant included.
Lubrication for replacement motors
When you install a motor drive assembly, you must grease the posts and gears to ensure proper performance
from the printer.
Redrive parts packet
1. Using the 739A grease that came with the redrive assembly, lubricate the four posts (A).
2. Install the gears.