Lexmark X792 - Front Access Door Assembly Removal

Repair information 4-9
7562
Go Back
Previous
Next
12. Pull forward and up to disengage the pin on the left, and then pry out the pin on the right.
13. Lift to remove the cover.
Front access door assembly removal
See “Front, right, and top covers” on page 7-3 for the part number.
1. Remove the AIO option cover. See “AIO option cover removal” on page 4-4.
Note: If you have any output options installed, then the option cover is already removed. Remove the
output options and HTU redrive unit instead.
2. Remove three screws (B), and then remove the front access door pivot to remove the front access door
assembly.
B (88A0323)