2-122 Service Manual
7562
250.21, 250.22—MPF motor error service check
6
1. Check the pick assembly for mechanical
wear or damage.
2. Check if the pick arm spring is not
dislodge.
Is the pick assembly not damaged?
Go to step 7. For 550-sheet input option:
Replace the pick assembly.
See “550-sheet tray pick
assembly removal” on
page 4-250.
For 2000-sheet input
option: Replace the pick
assembly. See “2000-
sheet high-capacity
feeder pick assembly
removal” on page 4-295.
7
For 550-sheet input option: Replace the
media tray assembly. See “550-sheet media
tray assembly removal” on page 4-240.
For 2000-sheet input option: Replace the
media tray assembly. See “2000-sheet high-
capacity feeder media tray assembly
removal” on page 4-292.
Does the problem persists?
For 550-sheet input option:
Replace the 550-sheet
drawer assembly. See
“550-sheet drawer
assembly removal” on
page 4-239.
For 2000-sheet input
option: Replace the 2000-
sheet high-capacity feeder
input option.
Problem solved.
Step Questions / actions Yes No
1 Open the left access door.
Does the MPF wheels turn freely?
Go to step 3. Go to step 2.
2
Remove the LVPS fan shield. See “LVPS
exit duct removal” on page 4-84.
Are the gears (A) damaged?
Replace the MPF pick
parts. See “MPF pick
parts packet, including”
on page 7-5.
Replace the MPF paper
pick assembly. See “MPF
paper pick assembly
removal (including the
MPF ratchet collar and
MPF drive pulley)” on
page 4-98.
Step Questions / actions Yes No
To Next Page
Loading...
