Lexmark X792 - Paper Jam Error Service Check

Diagnostic information 2-105
7562
Go Back
Previous
Next
200.32—Paper Jam error service check
5
Remove the staging deflector assembly. See
“Staging deflector assembly removal” on
page 4-138.
Is the cable connected correctly?
Go to step 6. Reseat the cable.
6
Replace the input sensor. See “Sensor
(input, S1, narrow media, near narrow
media) removal” on page 4-137.
Does the error reoccur?
Replace the system board.
See “System board
removal” on page 4-149
Problem solved.
Step Questions / actions Yes No
1 Open the left access door. Check the near
narrow media sensor flag (D) for damage.
Is the near narrow media flag damaged?
Replace the near narrow
media sensor. See
“Sensor (input, S1,
narrow media, near
narrow media) removal”
on page 4-137.
Go to step 2.
Step Questions / actions Yes No