Diagnostic aids 3-31
7562
Reports
From this menu you can print the Menu Settings Page or the Event Log.
Color Trapping
Color trapping is an aid to graphics and text. When text or graphics appear over other colors, a misalignment
may allow white paper to show through at the borders of the colors. Color trapping increases the amount of color
under the upper image so a slight misalignment does not show. This affects PCL 5e, PCL XL, PDF, and
PostScript printing.
Increasing the value increases the amount of color remaining beneath the black content, in increments of 1/600
of an inch.
1. Select Color Trapping from the Configuration menu.
2. Select the value or Off. The range is 1 to 5, and the default value is 2.
Press (+) to increase the value.
Tray Insert Msg
This setting controls how long, in seconds, the tray insert message appears when a tray is inserted.
The values are Disabled and 1 to 90. The default value is 5.
SIZE SENSING
Automatic size sensing can be disabled or enabled in this menu. Only paper sources that support Auto Size
Sensing are displayed.
1. Select SIZE SENSING from the Configuration menu.
2. Select a tray. Only those trays with size sensing appear. Select Auto to turn size sensing on for that tray,
or select Off to disable size sensing.
3. Touch Back to exit.
Panel Menus
Disabling Panel Menus prohibits users from modifying any setting or executing any operation available in the
Ready Menu group.
PPDS Emulation
This appears only if the PPDS interpreter is available.
Download Emuls
Warning: This setting should not be changed without specific instructions from the next level of support.
This setting temporarily disables downloaded emulators for troubleshooting purposes. All downloaded
emulators are re-enabled automatically after two PORs.
Factory Defaults
The customer can restore either the network settings or the base printer settings to their factory default values.
When Restore Base is selected, non-critical base printer NVRAM settings are restored. When Restore STD Net
is selected, all network NVRAM settings are restored to their factory default settings. This option is available
only on models with an integrated network adapter. When Restore LES is selected, all non-standard
To Next Page
Loading...
