Lexmark X792 - Sensor (ADF Lower Door Interlock) Removal

Repair information 4-207
7562
Go Back
Previous
Next
5. Remove the two screws (B) securing the sensor bracket, and remove the bracket.
6. Remove the screw (C) securing the sensor to the bracket.
Sensor (ADF lower door interlock) removal
See “ADF electronics” on page 7-27 for the part number.
1. Remove the ADF front cover. See “ADF front cover removal” on page 4-170.
2. Remove the ADF platen cushion. See “ADF platen cushion removal” on page 4-193.
3. Press the green tab to open the ADF lower door assembly.
4. Squeeze the tabs to remove the sensor (A) from the ADF frame.
5. Disconnect the cable to remove the sensor.
B C
A
A