Lexmark X792 - Configuration Menu; Entering the Configuration Menu; Next

Diagnostic aids 3-29
7562
Go Back
Previous
Next
Configuration Menu
The Configuration Menu contains a set of menus, settings, and operations which are infrequently used by a
user. Generally, the options made available in this menu are used to configure a printer for operation.
Note: An asterisk (*) in the value list in the following menus indicates the default value.
Entering the Configuration Menu
1. Turn off the printer.
2. Press and hold 2 and 6.
3. Turn on the printer.
4. Hold the buttons until the splash screen appears.
The following menus and settings are available from the Configuration Menu:
Configuration Menu
Reset Separator Roll
and Pick Assembly
Counter
See “Reset Separator Roll and Pick Assembly Counter” on page 3-30.
USB Scan to Local See “USB Scan to Local” on page 3-30.
Black Only Mode See “Black Only Mode” on page 3-30.
Print Quality Pages See “Print Quality Pages” on page 3-30.
Reports See “Reports” on page 3-31.
Color Trapping See “Color Trapping” on page 3-31.
Tray Insert Msg See “Tray Insert Msg” on page 3-31.
SIZE SENSING See “SIZE SENSING” on page 3-31.
Panel Menus See “Panel Menus” on page 3-31.
PPDS Emulation See “PPDS Emulation” on page 3-31.
Download Emuls See “Download Emuls” on page 3-31.
Factory Defaults See “Factory Defaults” on page 3-31.
Energy Conserve See “Energy Conserve” on page 3-32.
Fax Low Power
Support
See “Fax Low Power Support” on page 3-32.
Min Copy Memory See “Min Copy Memory” on page 3-32.
NumPad Job Assist See “NumPad Job Assist” on page 3-32.
Format Fax Storage See “Format Fax Storage” on page 3-32.
Fax Storage Location See “Fax Storage Location” on page 3-32.
Color Adjustment See “Color Adjustment” on page 3-32.
Auto Align Adj See “Auto Align Adj” on page 3-33.
Color Alignment See “Color Alignment” on page 3-33.
Motor Calibration See “Motor Calibration” on page 3-33.