Lexmark X792 - Assembly 15.1: Finisher;High-capacity output stacker assembly (continued)

Parts catalog 7-39
7562
Go Back
Previous
Next
Assembly 15.1: Finisher/High-capacity output stacker assembly
(continued)
Asm-
Index
Part
number
Units/
mach
Units/
FRU
Description Removal procedure
15.1—1 40X7244 1 1 Rear media stack flap “Finisher or stacker media stack
flap and media stack flap actuator
removal” on page 4-341
2 40X7245 1 1 Front media stack flap “Finisher or stacker media stack
flap and media stack flap actuator
removal” on page 4-341
3 40X7243 1 1 LED clear lens “Finisher or stacker standard output
bin LED and LED lens removal” on
page 4-355
4 40X4622 1 1 Rear tamper motor assembly “Finisher or stacker tamper drive
motor assembly removal” on
page 4-357
5 40X4624 1 1 Tamper recoil spring “Finisher or stacker tamper recoil
spring removal” on page 4-358
6 40X5909 1 1 Sensor (tamper front and rear paddle) “Finisher or stacker sensor (paddle
HP) removal” on page 4-351
7 40X4623 1 1 Tamper drive belt “Finisher or stacker tamper drive
belt removal” on page 4-356
8 40X4621 1 1 Front tamper motor assembly “Finisher or stacker tamper drive
motor assembly removal” on
page 4-357
9 40X5545 1 1 Output beacon card “Finisher or stacker output bin LED
and LED lens removal” on
page 4-343
10 40X4615 1 1 Paddle drive motor “Finisher or stacker paddle drive
motor assembly removal” on
page 4-345