Lexmark X792 - Assembly 4: Left

Parts catalog 7-11
7562
Go Back
Previous
Next
Assembly 4: Left
Index P/N
Units/
mach
Units/
FRU
Description Removal procedure
4—1 40X7133 1 1 Redrive parts packet, including
•Gear thrust washer (2)
•Gear—Idler 50T (2)
•Gear—64T 22T Compound
•Gear—36T 18T Compound
“Redrive gears removal” on
page 4-132
2 40X7166 1 1 ITU autoconnect cable “ITU autoconnect removal” on
page 4-73
3 40X7163 Sensors parts packet, including
•Waste toner sensors (2) (not shown)
•Paper auto size sensor (not shown)
•Paper path sensors (input, S1,
narrow media, near narrow media)
•Bin-full sensor (not shown)
“Staging deflector assembly
removal” on page 4-138
4 40X7146 1 1 Staging deflector assembly with
sensors
“Staging deflector assembly
removal” on page 4-138
5 40X7172 1 1 Fuser/MPF/autocomp parts packet,
including
•Fuser datum rear bellcrank
•Fuser datum front bellcrank
•Fuser datum bellcrank spring (2)
•Autocomp (ACM) bias spring
•MPF rear breakaway support
•MPF front breakaway support
“Datum bell crank removal” on
page 4-48
“ACM bias spring removal” on
page 4-33
“MPF breakaway assemblies
removal” on page 4-95
6 40X7134 1 1 Paper path redrive assembly “Paper path redrive assembly with
sensors removal” on page 4-116
7 40X7164 1 1 Lower frame cable cover “Lower frame cable cover removal”
on page 4-20
8 40X7132 1 1 Redrive motor assembly “Redrive motor removal” on
page 4-133