84.xx [Color] photoconductor low
1 Order a replacement photoconductor immediately.
2 When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the
replacement supply.
Notes:
• All four photoconductors should be replaced at the same time.
• Make sure to reset the maintenance counter after replacing the photoconductors for optimum print quality.
3 Touch Continue to clear the message and continue printing.
84.xx Replace [color] photoconductor
1 Replace the photoconductor, following the instruction sheet that came with the replacement supply.
Notes:
• All four photoconductors should be replaced at the same time.
• Make sure to reset the maintenance counter after replacing the photoconductors for optimum print quality.
2 From the printer control panel, touch Continue to clear the message and continue printing.
88 Replace [color] cartridge
The specified print or toner cartridge is empty.
1 Replace the specified cartridge.
For instructions on replacing cartridge, from the printer control panel, touch More Information.
2 Touch Continue to clear the message and continue printing.
88.xx [Color] cartridge critically low
The specified print cartridge is critically low.
1 For instructions on replacing a print cartridge, from the printer control panel touch More Information.
2 Touch Continue to clear the message and continue printing.
88.xx [color] cartridge low
1 Remove the specified cartridge.
Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.
2 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner.
3 Reinsert the cartridge, and then touch Continue to clear the message and continue printing.
Troubleshooting 284
To Next Page
Loading...
