Power Saver – Reduces the power state of the printer after printing – adjustable from
1-240 minutes
Scheduled Warm-up using MarkVision – Conserves energy by scheduling power
saver to engage during specified days and times during the week
Instant Warm-Up fuser – Saves energy
Eco-Mode – Conserves energy and paper through three optional settings:
Energy Saving Mode: Operator panel backlight and advance paper start are
disabled, the fuser is not continually heated, and the scanner lamps are only
activated when a scan job is started
Paper Saving Mode: Device defaults to duplex printing and the print log features
are turned off
Energy + Paper Saving Mode: Energy and paper saving settings are activated
Quiet Mode – Reduces noise emission by adjusting print speed, disabling advanced
paper start, disabling or minimizing beeps (key press, alarms, etc.), and adjusting fan
speed (Quiet mode may be combined with Eco-Mode)
Multi-Page Printing – Prints multiple page images on one page
Duplex – Prints on both sides of a page
Recycled Paper – Supports the use of recycled content media
Print and Hold – Holds print jobs until released by the user at the printer interface by
entering a pin number (Hard drive option needed)
Badge Reader Authentication – Holds print jobs until released by the user at the
printer interface by swiping an identification badge (Hard drive option and integration
services required through SPR)
Fax Redirect – Conserves paper by digitalizing faxes and redirecting to email or file
rather than printing (Hard drive option required)
Distribute Information Electronically – Conserves paper by routing scanned
documents to e-mail, network folders, USB thumb drives, FTP, and LDSS
destinations (Additional options may be required)
Toner Darkness Control – Adjusts the print darkness to conserve toner
Color Saver – Conserves toner by printing images and graphics lighter