Lexmark Z52 - Page 13

Steps to basic printing
13
Printing beyond the basics
Beyond the basics
Maintaining your printer
Troubleshooting
Appendix
Index
Steps to basic printing
Changing your print settings for specialty paper.
When you installed your printer software, the Page Setup dialog box
and the Print dialog box were set to the default settings. Use the
default settings for printing most documents on plain paper.
However, you may need to change your printer options for printing
on specialty papers.
When you are
printing on this
specialty media:
Open this
dialog box:
And make these selections:
Envelopes Page Setup From the Paper Size pop-up menu,
select the appropriate envelope size.
Cards Page Setup From the Paper Size pop-up menu,
select the appropriate card size.
Banners Page Setup From the Paper Size pop-up menu,
select Banner (Letter) or Banner
(A4).