211
3-1. Using the touch screen
3
Interior features
GS_G_U
March 29, 2010 3:11 pm
n Resetting the data
Touching will reset the “Average Speed” and “Distance”.
n To avoid damaging the touch screen
l Touch the screen lightly with your finger. If there is no response, remove your fin-
ger from the screen and try again.
l Remove any dirt on the screen by wiping with a soft cloth. Do not use detergent.
n When using the touch screen
l If the screen is cold, the display may be dark, or the system may seem to be
operating slightly slower than normal.
l The screen may seem dark and hard to see when viewed through sunglasses.
Change your angle of viewing, adjust the display on the “Display” screen or
remove your sunglasses.
To Next Page
Loading...
