Lexus 2013 IS250C User Manual

49
1-2. Opening, closing and locking the doors and trunk
1
Before driving
■ Setting and canceling the functions
To switch between setting and canceling, follow the procedure below:
Close both side doors and switch the “ENGINE START STOP”
switch to IGNITION ON mode. (Perform the step 2 within 20
seconds.)
Shift the shift lever to P or N, press
and hold the driver's door lock
switch ( or ) for about
5 seconds then release.
The shift lever and switch positions
corresponding to the desired func-
tion to be set are shown as follows.
Use the same procedure to cancel
the function.
When the setting or canceling operation is complete, both side doors are
locked and then unlocked.
STEP 1
STEP 2
Function Shift lever position
Driver’s door lock
switch position
Shift position linked door locking
function
P
Shift position linked door unlock-
ing function
Speed linked door locking function
N
Driver's door linked door unlocking
function

Lexus 2013 IS250C Specifications

General

Brand	Lexus
Model	2013 IS250C
Category	Automobile
Language	English