Lexus CT200h - Registering a Bluetooth Phone for the First Time

293
CT200h_OM_OM76174U_(U)
5-6. Using Bluetooth
®
devices
5
Audio system
Registering a Bluetooth
®
phone for the first time
Press the off-hook switch or the talk switch.
The introductory guidance and phone name registration instructions are heard.
Select “Pair Phone” using a voice command or the “TUNE•SEL” knob.
Register a phone name by either of the following methods:
a. Select “Record Name” using the knob, and say the name to be registered.
b. Press the talk switch and say the name to be registered.
A voice guidance instruction to confirm the input is heard.
Select “Confirm” using a voice command or the knob.
A passkey is displayed and heard, and a voice guidance instruction for inputting
the passkey into the cellular phone is heard.
Input the passkey into the cellular phone.
Refer to the manual that comes with the cellular phone for the operation of the phone.
Guidance for registration completion is heard.
If the cellular phone has a Bluetooth
®
audio player, the audio player can be reg-
istered at the same time. A voice guidance instruction to register a Bluetooth
®
audio player is heard.
Select “Yes” or “No” using a voice command or the knob.
(Bluetooth
®
audio player P. 317)
■ Changing the passkey
P. 301
Before using the hands-free phone system, it is necessary to register a cellular
phone in the system. The system will enter phone registration mode automati-
cally when starting the system with no cellular phone registered. Follow the
procedure below to register (pair) a cellular phone:
1
2
3
4
5
6
Information Provided by: