185
2-1. Driving procedures
2
When driving
CT200h_U (OM76040U)
■ Operation of the air conditioning system in Eco drive mode (without navigation
system)
Eco drive mode controls the heating/cooling operations and fan speed of the air
conditioning system to enhance fuel efficiency. (P. 298) To improve air condi-
tioning performance, adjust the fan speed or turn off Eco drive mode.
■ Operation of the air conditioning system in Eco drive mode (with navigation sys-
tem)
Eco drive mode controls the heating/cooling operations and fan speed of the air
conditioning system to enhance fuel efficiency. To improve air conditioning perfor-
mance, adjust the fan speed or turn off Eco drive mode. (Refer to the “Navigation
System Owner’s Manual”.)
■ For the shift positions
● When the “POWER” switch is off, the shift position cannot be changed.
● When the “POWER” switch is in ON mode (the hybrid system is not operating),
the shift position can only be changed to N. The shift position will be changed to
N even if the shift lever is shifted to D or R and held in that position.
● When the “READY” indicator is on, the shift position can be changed from P to
D, N or R.
● When the “READY” indicator is flashing, the shift position cannot be changed
from P to another position even if the shift lever is operated. Wait until the
“READY” indicator changes from a flashing to a solid light, and then operate the
shift lever again.
● The shift position can only be changed to B directly from D.
To Next Page
