1-4. Adjustable components (seats, mirrors, steering wheel)
Your preferred driving position (the position of the driver’s seat and outside
rear view mirrors) can be memorized and recalled with the touch of a but-
ton. It is also possible to set this function to activate automatically when the
doors are unlocked.
Three different driving positions can be entered into memory.
■ Entering a position to memory
Turn the “POWER” switch to ON mode.
Adjust the driver’s seat and outside rear view mirrors to the
desired positions.
While pressing the “SET” but-
ton, or within 3 seconds after
the “SET” button is pressed,
press button 1, 2 or 3 until the
signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
■ Recalling the memorized position
Turn the “POWER” switch to ON mode.
Press button 1, 2 or 3 to recall
the desired position.