187
2-1. Driving procedures
2
When driving
CT200h_U (OM76040U)
■ Reverse warning buzzer
When shifting into R, a buzzer will sound to inform the driver that the shift position is
in R.
■ About engine braking
When shift position B is selected, releasing the accelerator pedal will apply engine
braking.
• When the vehicle is driven at high speeds, compared to ordinary gasoline-
fueled vehicles, the engine braking deceleration is felt less than that of other
vehicles.
• The vehicle can be accelerated even when shift position B is selected.
If the vehicle is driven continuously in the B position, fuel efficiency will become low.
Usually, select the D position.
■ Automatically P position selection function
When the “POWER” switch is in ON mode while the shift position is in a position
other than P and the vehicle is stopped completely, pressing the “POWER” switch
will cause the automatically P position selection function to operate together with
the “POWER” switch being turned to off.
■ If the shift position cannot be shifted from P
There is a possibility that the 12-volt battery is discharged. Check the 12-volt battery
in this situation. (P. 651)
■ Sport mode automatic deactivation
Sport mode is automatically deactivated if the “POWER” switch is turned off after
driving in sport mode.
■ After recharging/reconnecting the 12-volt battery
P. 53 1
■ Customization
Settings (e.g. Reverse warning buzzer) can be changed.
(Customizable features P. 70 1)
To Next Page
