512
4-3. Do-it-yourself maintenance
CT200h_U (OM76040U)
■ Pre-driving check
Check that the hood is fully closed and locked.
If the hood is not locked properly, it may open while the vehicle is in motion and
cause an accident, which may result in death or serious injury.
■ After installing the support rod into the slot
Make sure the rod supports the hood securely from falling down on to your head or
body.
■ When closing the hood
Be sure to return the support rod to its clip before closing the hood. Closing the
hood without returning the support rod properly could cause the hood to bend.
To Next Page
