86
1-4. Adjustable components (seats, mirrors, steering wheel)
CT200h_U (OM76040U)
■ Operating the driving position memory after turning the “POWER” switch off
Memorized positions can be activated up to 180 seconds after the driver’s door is
opened and another 60 seconds after it is closed again, even after turning the
“POWER” switch off.
■ Canceling the linked door unlock operation
Turn the “POWER” switch to ON mode and close the driver’s door.
While pressing the “SET” button, press the driver’s door lock switches
(either lock or unlock) until the signal beeps.
■ Stopping seat position operation part-way through
Perform any of the following operations:
● Press the “SET” button.
● Press button 1, 2 or 3.
● Adjust the seat using the switches (only cancels seat position recall).
■ Correct seat position
When the seat is in the most forward or most backward position, and the seat is
being moved in those directions, the system may not correctly recognize the cur-
rent position and the memorized position will not be correctly recalled.
■ Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passenger
or squeeze your body against the steering wheel.
STEP 1
STEP 2
To Next Page
Loading...
