GS350_300_GS F_OM_OM30G34U_(U)
101
2. Instrument cluster
2
Instrument cluster
Settings display
Select to change the meter display settings. (→P. 546)
The multi-information display is oper-
ated using the meter control switches.
:Switch menu
: Change displayed con-
tent, scroll up/down the
screen and move the cur-
sor up/down
Press: Enter/Set
Press and hold: Reset
Return to the previous screen
Press: Displays the screen registered to
When no screen has been registered, the drive information screen will be displayed.
Press and hold: Registers the currently displayed screen to (→P. 546)
When the confirmation screen is displayed, select yes to register the screen. If the
selected screen cannot be registered, a registration failure message will be shown.
Operating the meter control switches
1
2
3
4
To Next Page
Loading...
