EasyManua.ls Logo

Lexus GS300 - Cleaning and Protecting the Vehicle Exterior; Maintenance and Care Cleaning and Protecting the Vehicle Exterior

Lexus GS300
602 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
358
GS350_300_GS F_OM_OM30G34U_(U)
6-1. Maintenance and care
Cleaning and protecting the vehicle exterior
Working from top to bottom, liberally apply water to the vehicle body, wheel
wells and underside of the vehicle to remove any dirt and dust.
Wash the vehicle body using a sponge or soft cloth, such as a chamois.
For hard-to-remove marks, use car wash soap and rinse thoroughly with
water.
Wipe away any water.
Wax the vehicle when the waterproof coating deteriorates.
If water does not bead on a clean surface, apply wax when the vehicle body is cool.
CFRP (Carbon Fiber Reinforced Plastic) part (GS F)
CFRP is used for the parts shown in the illustration.
Self-restoring coat*
The vehicle body has a self-restoring coating that is resistant to small surface scratches
caused in a car wash etc.
The coating lasts for 5 to 8 years from when the vehicle is delivered from the plant.
The restoration time differs depending on the depth of the scratch and outside tem-
perature. The restoration time may become shorter when the coating is warmed by
applying warm water.
Deep scratches caused by keys, coins, etc. cannot be restored.
Do not use wax that contain abrasives.
*: CFRP parts (GS F) do not have a self-restoring coat.
Perform the following to protect the vehicle and maintain it in prime condi-
tion:
As the CFRP parts may change color if they
are exposed to ultraviolet rays for extended
periods of time, Lexus recommends that your
vehicle be stored in a place where it will not be
exposed to direct sunlight.
Do not use wax that contains abrasives.
CFRP parts may get scratched when using an
automatic car wash.

Table of Contents

Other manuals for Lexus GS300

Related product manuals