438
GX460_OM_OM60L72U_(U)
6-1. Maintenance and care
Cleaning and protecting the vehicle exterior
● Working from top to bottom, liberally apply water to the vehicle body, wheel
wells and underside of the vehicle to remove any dirt and dust.
● Wash the vehicle body using a sponge or soft cloth, such as a chamois.
● For hard-to-remove marks, use car wash soap and rinse thoroughly with
water.
● Wipe away any water.
● Wax the vehicle when the waterproof coating deteriorates.
If water does not bead on a clean surface, apply wax when the vehicle body is cool.
■ Automatic car washes
● Fold the mirrors back before washing the vehicle. Start washing from the front of the
vehicle. Make sure to extend the mirrors before driving.
● Brushes used in automatic car washes may scratch the vehicle surface and harm your
vehicle’s paint.
■ High pressure car washes
● Do not allow the nozzles of the car wash to come within close proximity of the windows
and the air suspension unit.
● Before using the car wash, check that the fuel filler door on your vehicle is closed prop-
erly.
■ Aluminum wheels
● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or
abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild
detergent and wax as used on the paint.
● Do not use detergent on the wheels when they are hot, for example after driving for
long distance in the hot weather.
● Wash detergent from the wheels immediately after use.
■ Bumpers and side moldings
Do not scrub with abrasive cleaners.
Perform the following to protect the vehicle and maintain it in prime condi-
tion: