88
2. Instrument cluster
IS350/250_U (OM53C50U)
■ Distance (driving range/after start)*
Displays the estimated maximum distance that can be driven with the quantity
of fuel remaining and the distance driven after the engine was started respec-
tively.
• This distance is computed based on your average fuel consumption. As a result,
the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may not be
updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning
the engine switch off, the display may not be updated.
■ Eco Driving Indicator
P. 90
■ Tire inflation pressure
P. 424
■ Gear positions
P. 168
*: Displayed when the item is set in “Drive Info 1” or “Drive Info 2”. Use these values as a
reference.
■ Language
Select to change the language on the display.
■ Units
Select to change the unit of measure for fuel consumption.
■ Maintenance system
Select to reset the maintenance data after the required maintenance is per-
formed. (
P. 403)
■ Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light.
■ switch settings (except F SPORT models)
Displays a procedure to register a desired screen to .
You can register 1 screen as a shortcut, which can be displayed by pressing
. (
P. 87)
■ Drive information 1/Drive information 2
Select to select up to 2 items that will be displayed on the “Drive Info 1” screen
and “Drive Info 2” screen respectively. (
P. 87)
Settings display
To Next Page
Loading...
