EasyManua.ls Logo

Lexus IS300h - HV Battery Removal: Accessing the Battery Compartment; HV Battery Removal: Disabling the HV System

Lexus IS300h
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. REMOVE LUGGAGE COMPARTMENT
TRIM BOX
(1) Remove the 6 clips.
(2) Disengage the 3 guides and remove the
luggage compartment trim box.
6. REMOVE NO. 5 HYBRID BATTERY
SHIELD PANEL
(1) Remove the 3 nuts and No. 5 hybrid battery
shield panel from the HV battery.
7. REMOVE SERVICE PLUG GRIP
Caution:
Wear insulated gloves.
Remove the service plug grip to interrupt
the high voltage circuit.
Keep the removed service plug grip in your pocket to prevent other technicians
from accidentally reconnecting it while you are servicing the vehicle.
All the high voltage wiring connectors are orange.
After removing the service plug grip, do not touch the high voltage connectors
or terminals for 10 minutes.
Hint:
Waiting for at least 10 minutes is required to discharge the high voltage capacitor inside the
inverter with converter assembly.
(1) Wear insulated gloves and remove the service plug grip after sliding the lever of the service
plug grip as shown in the illustration.
21

Related product manuals