22
For LHD:
8. REMOVE CONNECTOR COVER
ASSEMBLY
Caution:
Wear insulated gloves.
(1) Remove the 2 bolts and connector cover
assembly from the inverter with converter
assembly.
For RHD:
9. CHECK TERMINAL VOLTAGE
Caution:
Wear insulated gloves.
For LHD:
(1) Using a voltmeter, measure the voltage
between the terminals of the 2 phase
connectors.
Standard voltage:
0 V
Hint:
Use a measuring range of DC 750 V or more on
the voltmeter.
For RHD:
Fastener
10. REMOVE FRONT LUGGAGE
COMPARTMENT TRIM COVER (for Fixed
Seat Type)
(1) Remove the 3 clips.
(2) Disengage the 2 fasteners.
To Next Page
Loading...
