31. SEPARATE NO. 3 HYBRID BATTERY
INTAKE DUCT
(1) Disengage the 3 claws.
(2) Slide the No. 3 hybrid battery intake duct to
separate the No. 3 hybrid battery intake duct
from the battery cooling blower assembly as
shown in the illustration.
32. REMOVE NO. 4 HYBRID BATTERY
INTAKE DUCT
Caution:
Wear insulated gloves.
(1) Remove the 2 clips, No. 4 hybrid battery intake
duct and No. 3 hybrid battery intake duct from
the HV battery.
33. REMOVE NO. 3 HYBRID BATTERY
INTAKE DUCT
(1) Remove the No. 3 hybrid battery intake duct
from the No. 4 hybrid battery intake duct.
34. REMOVE NO. 1 FLOOR UNDER COVER
ASSEMBLY
(1) Remove the 4 clips (A) from the No. 1 floor
under cover assembly.
(2) Disengage the 6 clips (B) and remove the No.
1 floor under cover assembly.
B
B
B
B
B
B
35. REMOVE HV BATTERY
Caution:
Wear insulated gloves.
(1) Remove the 2 grommets.
33
To Next Page
Loading...
