32
Service Plug Grip
29. REMOVE NO. 4 HYBRID BATTERY
SHIELD PANEL
Caution:
Wear insulated gloves.
Projection
(1) Using the service plug grip, remove the
battery cover lock striker from the No. 4
hybrid battery shield panel.
Button
Hint:
Insert the projection of the service plug grip, turn
the button of the battery cover lock striker
counterclockwise, and release the lock.
Battery Cover Lock Striker
(2) Remove the 4 nuts and No. 4 hybrid battery
shield panel.
30. DISCONNECT FRAME WIRE
Caution:
Wear insulated gloves.
(1) Remove the earth terminal from the upper
hybrid battery cover sub-assembly.
(2) Disengage the 2 clamps from the upper hybrid
battery cover sub-assembly.
(3) Disconnect the 2 frame wire connectors from
the hybrid battery terminal block.
Notice:
Insulate the disconnected connectors with
insulating tape.
To Next Page
Loading...
