112
2-1. Driving procedures
Turn signal lever
The turn signal lever can be used to show the following intentions of the driver:
Right turn
Left turn
Move and hold the lever part-
way to signal a lane change
The right hand signal will flash until
you release the lever.
Move and hold the lever part-
way to signal a lane change
The left hand signal will flash until
you release the lever.
■ Turn signals can be operated when
The ignition switch is in the “ON” position.
■ If the indicator flashes faster than usual
A light bulb in the front or rear turn signal light may have burned out. Have the vehi-
cle inspected at your Lexus dealer.
To Next Page
Loading...
