137
2-2. Instrument cluster
2
When driving
“Cannot measure” display
If measurement cannot be per-
formed, the item with “No” dis-
played may be the cause. Check
the following items and then
attempt to perform the measure-
ment again:
If the measuring function does not work even after all the above condi-
tions have been met, have the vehicle inspected by your Lexus dealer.
Item Details Correction procedure
Engine Warm
The engine oil has not
warmed sufficiently.
Measure when the engine
oil temperature is between
203F and 230F (95C
and 110C).
Idling
The engine speed is too low
or too high.
Measure when the engine
speed is between 900 rpm
and 1100 rpm.
Stationary
The vehicle is not com-
pletely stationary.
Measure when the vehicle
is completely stopped with
Neutral selected and the
parking brake set.
Vehicle Level
The vehicle is parked on an
incline.
Measure when the vehicle
is on level ground with an
incline of 4 degrees or less.
To Next Page
Loading...
