Lexus LFA - Page 269

267
4-3. Do-it-yourself maintenance
4
Maintenance and care
■ Removing the negative (-) battery terminal
Turn the ignition switch to the “LOCK” position and check that the gear
indicator is not displayed. (P. 269)
Open the rear hatch and remove the cover.
● When reconnecting the terminal, make sure that the lever is lowered into the
lock position.
● Do not disconnect the terminal while the power seats, power windows or other
electrical devices are being operated.
● When the battery terminal is disconnected, the “Lap Timer” data and clock in
the meter will be reset.
STEP 1
STEP 2
Lift the lever.
Disconnect the terminal.
STEP 3
Lock position
STEP 4