Lexus LFA - Page 28

26
1-2. Opening, closing and locking the doors
Automatic door locking and unlocking systems
The following functions can be set or canceled:
■ Setting and canceling the function
To switch between setting and canceling, follow the procedure below:
Close both side doors and turn the ignition switch to the “ON”
position. (Perform step 2 within 20 seconds.)
Check that Neutral is selected
(P. 103), press and hold the
door lock switch ( or )
for about 5 seconds then release.
The switch positions correspond-
ing to the desired function to be set
are shown in the following table.
Use the same procedure to cancel
the function.
When the setting or canceling operation is complete, both side doors are
locked and then unlocked.
Function Operation
Speed linked door locking
function
Both side doors are locked when the vehicle
speed is approximately 12 mph (20 km/h) or
higher.
Driver's door linked door
unlocking function
Both side doors are unlocked when the driver's
door is opened within 10 seconds after turning
the ignition switch to the “LOCK” position.
STEP 1
STEP 2
Setting Door lock switch position
Speed linked door locking function
Press
Driver's door linked door unlocking function
Press