82
1-7. Safety information
While pushing the child restraint
system into the seat, allow the lap
belt to retract until the child
restraint system is securely in
place.
After the lap belt has retracted to a
point where there is no slack in the
belt, pull the belt to check that it
cannot be extended.
If the child restraint has a top tether strap, the top tether strap
should be latched onto the top tether strap anchor.
■ Booster seat
Place the booster seat on the seat
facing the front of the vehicle.
Sit the child in the booster seat. Fit
the seat belt to the booster seat
according to the manufacturer's
instructions and insert the plate
into the buckle. Make sure that the
belt is not twisted.
Check that the lap belt is correctly
positioned over the child's shoul-
der, and that the lap belt is as low as
possible. (P. 3 6 )
To Next Page
Loading...
