300
3-3. Using the audio system
Switching the display
Press .
Each time the switch is pressed, the display changes in the order of the Folder
no./File no./Elapsed time Folder name File name Album title (MP3
only) Track title Artist name.
■ Canceling random, repeat and scan playback
Press
(RAND), (RPT) or again.
■ When “LOAD”, “ERROR” or “WAIT” is shown on the display.
“LOAD”: This indicates that the CD player has completed loading the disc.
“ERROR”: Make sure the label of the displayed disc is facing up, and then reinsert
it in the player.
“WAIT”: Operation has stopped due to a high temperature inside the player.
Wait for a while and then press . Contact your Lexus dealer if the
disc still cannot be played back.
“NO MUSIC”: This indicates that MP3 or WMA files are not present on the disc.
■ CD player protection feature
To protect the internal components, playback is automatically stopped when a
problem is detected while the CD player is being used.
■ If discs are left inside the CD player or in the ejected position for extended peri-
ods
Discs may be damaged and may not play properly.
■ Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.
To Next Page
Loading...
