658
5-2. Steps to take in an emergency
Changing “ENGINE START STOP” switch modes and starting the engine
Ensure that the shift lever is in “P” and apply the brakes.
Touch the Lexus emblem side of
the electronic key to the
“ENGINE START STOP” switch.
If any of the doors is opened or
closed after the key was touched to
the switch to start the vehicle, an
alarm will sound to indicate that the
start function cannot detect the
key.
To change “ENGINE START STOP” switch modes: Within 5 sec-
onds of the buzzer sounding, release the brake pedal and press
the “ENGINE START STOP” switch. Modes can be changed
each time the switch is pressed. (P. 147)
To start the engine: Press the “ENGINE START STOP” switch
within 10 seconds [after the buzzer sounds], keeping the brake
pedal depressed.
In the event that the engine still cannot be started, contact your Lexus
dealer.
To Next Page
Loading...
