674
5-6. Using the hands-free phone system (for cellular phone)
LS600h/LS600hL_EE(OM50D61E)
Manual
When the auto connection has failed or “Bluetooth* power” is
turned off, you must connect Bluetooth
®
manually.
Display the “Telephone” screen. (P. 671)
Select “Connect telephone”.
Select the screen button cor-
responding to the desired
phone connection.
When the cellular phone’s
device name has not been able
to be obtained, “Device 1” to
“Device 5” will be displayed in
the order the phones were regis-
tered.
This screen is displayed.
If a completion message is dis-
played, connection is complete.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
To Next Page
Loading...
