675
5-6. Using the hands-free phone system (for cellular phone)
5
Interior features
LS600h/LS600hL_EE(OM50D61E)
Reconnecting to the Bluetooth
®
phone
If the system cannot connect due to poor signal strength with the power
switch in ACCESSORY or ON mode, the system will automatically attempt
to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, it must be connected manually, or the phone must be re-selected or re-
entered.
Connecting the phone while Bluetooth
®
audio is playing
Bluetooth
®
audio will stop temporarily.
It may take time to connect.
Connecting the phone while another Bluetooth
®
device is connected
When another Bluetooth
®
device is currently connected, a confirmation mes-
sage will be displayed. To disconnect the Bluetooth
®
device, select “Yes”.
Connecting the phone while 5 Bluetooth
®
devices have already been regis-
tered
When 5 Bluetooth
®
devices have already been registered, a registered device
needs to be deleted. Select “Yes” to delete one or more.
Select the device to be deleted, then select “Remove”, and “Yes”.
If the Bluetooth
®
phone has a Bluetooth
®
audio function
When the Bluetooth
®
phone to be registered has a Bluetooth
®
audio function,
this audio function will be registered automatically at the same time and con-
firmation message may be displayed. If this screen is displayed, select “Yes”
to connect the audio function or select “No” to cancel the connection.
To Next Page
Loading...
