Lexus LS600hl - Page 206

196
3-3. Adjusting the seats
LS600h/LS600hL_EE(OM50D61E)
 Seat return function linked to the door opening operation
 Operating conditions
The power switch is in ON mode.
 Canceling operation partway through
During the seat return operation, performing either of the following actions
cancels the operation:
• Pressing the “SET”, “M” or “C” button (P. 206)
• Pressing any of the seat adjustment switches
 Disabling the seat return function
 Seat return operation after turning the power switch off
The seat will automatically return to the neutral position if the door is
opened within approximately 45 seconds of the power switch being turned
off.
 Relaxation mode (relaxation seat)
 Operating conditions
Relaxation mode can be entered when the power switch is in ON mode.
However, in the following situations, relaxation mode cannot be entered
even when the switch is operated:
• The weight of an occupant or heavy object etc. is detected on the front
passenger's seat.
• The front passenger's seat belt is fastened.
• The front passenger's door is open. (The front seat will not move for-
ward.)
 Operation after turning the power switch off
The rear seat can be returned to the neutral position as long as the relaxation
mode switch is operated within approximately 45 seconds of the power
switch being turned off.
Pressing the “C” button will disable the
seat return function.
The indicator light comes on when the
seat return function is disabled.
Pressing the button again will enable
the seat return function.