205
3-3. Adjusting the seats
3
Operation of each component
LS600h/LS600hL_EE(OM50D61E)
Cancelation procedure
Using the wireless remote control
Turn the power switch off and close the driver’s door.
While pressing the “SET” switch, press on the wireless
remote control until the buzzer sounds.
Using the door lock switch
Carry only the key you want to cancel and then close the driver's
door. If 2 or more keys are in the vehicle, the driving position
cannot be canceled properly.
Turn the power switch off and close the driver’s door.
While pressing the “SET” switch, press the lock or unlock side
on the door lock switch until the buzzer sounds.
Recalling the driving position using the memory recall function
Different driving positions can be registered for each electronic key. There-
fore, the driving position that is recalled may be different depending on the
key being carried.
If a door other than the driver's door is unlocked with the smart entry & start
system, the driving position cannot be recalled. In this case, press the driv-
ing position switch which has been set.
Seat operation automatic stop function (vehicles with relaxation seat)
If a front seat is likely to come into contact with the retractable table (4-seat
models) or the ottoman during seat operation or activation of the power easy
access system, a buzzer will sound and seat slide operation will be stopped
partway.
(A warning message will be shown on the multi-information display.)
Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear
passenger or squeeze your body against the steering wheel.
To Next Page
Loading...
