Lexus LS600hl - Page 276

262
4-3. Operating the lights and wipers
LS600h/LS600hL_EE(OM50D61E)
With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with
the headlights on or off.
This system allows the headlights, tail, license plate and front posi-
tion lights to be turned on for 30 seconds when the power switch is
off.
Pull the lever toward you and
release it with the light switch in
or after turning the
power switch off.
The lights are turned off in the following situations.
 The power switch is turned to ON mode.
 The light switch is turned on.
 The light switch is pulled toward you and then released.
Turning on the high beam headlights
1
2
Follow me home system