Lexus LS600hl - Page 922

887
7-2. Steps to take in an emergency
7
When trouble arises
LS600h/LS600hL_EE(OM50D61E)
Turn the compressor switch on
and wait for several seconds,
then turn it off. Check the tire
inflation pressure.
If the tire inflation pressure
is below 130 kPa (1.3 kgf/
cm
2
or bar, 19 psi): The
puncture cannot be repaired.
Contact any authorized
Lexus dealer or repairer, or
another duly qualified and
equipped professional.
If the tire inflation pressure
is between 130 kPa (1.3 kgf/
cm
2
or bar, 19 psi) and a
point below the recom-
mended level: The tire can
be repaired. Proceed to step
.
If the tire inflation pressure
is at the recommended
level: Proceed to step .
Turn the compressor switch on to inflate the tire until the recom-
mended tire inflation pressure is reached. Drive for about 5 km (3
miles) and then perform step .
Attach the air release cap to
the end of the hose.
If the air release cap is not
attached, the sealant may leak and
the vehicle may get dirty.
20
1
2
21
3
22
21
19
22