902
7-2. Steps to take in an emergency
LS600h/LS600hL_EE(OM50D61E)
Replace the screwdriver head
with the parking brake release
tool.
Insert the tool and press it
down firmly while turning it
counterclockwise until it
stops.
When installing the tool tray clips (vehicles without a spare tire)
Manual operation of the parking brake
The parking brake cannot be set manually.
When releasing the parking brake manually
Shift the shift lever to P, turn the power switch off and chock the tires.
Failure to do so may cause the vehicle to move, resulting in an accident.
Turn the power switch off and check that the parking brake indicator is
off.
Failure to do so may cause the system to operate and turn the inserted
parking brake release tool, resulting in an injury.
Install the clips as shown in the illustra-
tion.
To Next Page
Loading...
