44
LX600_QG_OM60V82U_(U)
You can select this mode for easy access and easy loading of the vehicle.
To turn easy access mode on, turn the four-wheel drive control switch to H4 and press the
easy access mode switch on the Front Multi Operation Panel.
When the easy access mode is in on, the indicator on the switch and the easy access
mode indicator on the meter comes on.
If the engine switch is turned off within
approximately 30 seconds after the vehicle
is stopped while easy access mode is on, the
vehicle height is lowered automatically.
When the vehicle begins to lower, a buzzer
will sound twice. The easy access mode
indicator display will come on while the
vehicle is lowering to indicate that the vehi-
cle is lowering.
When the operation is complete, the easy
access mode indicator will turns off.
Easy access mode
To Next Page
Loading...
Need help?
General
