18
LX600_QG_OM60V82U_(U)
1 Pull the parking brake switch to check that the parking brake is set. (P.25)
The parking brake indicator will come on.
2 Check that the shift lever is set in P.
3 Firmly depress the brake pedal.
and a message will be displayed on the multi-information display.
If it is not displayed, the engine cannot be started.
4 Press the engine switch quickly but
fully.
When operating the engine switch,
one short, firm press is enough. It is not
necessary to press and hold the switch.
The engine will crank until it starts or
for up to 30 seconds, whichever is less.
Continue depressing the brake pedal
until the engine is completely started.
The engine can be started from any
engine switch mode.
Engine (Ignition) Switch
Performing the following operations when carrying the electronic key on your person
starts the engine or changes engine switch modes.
Starting the engine
To Next Page
Loading...
Need help?
General
