79
LX600_QG_OM60V82U_(U)
Vehicles with Digital Rear-view Mirror
HomeLink
®
logo
Appears while HomeLink
®
is operat-
ing.
When the menu button is pressed, the
logo disappears even while the
HomeLink
®
is operating.
Garage door operation indicators
HomeLink
®
indicator light
Illuminates above each button
selected.
Buttons
■Before programming HomeLink
®
● During programming, it is possible that garage doors, gates, or other devices may oper-
ate. For this reason, make sure that people and objects are clear of the garage door or
other devices to prevent injury or other potential harm.
● It is recommended that a new battery be placed in the remote control transmitter for
more accurate programming.
● Garage door opener motors manufactured after 1995 may be equipped with rolling
code protection. If this is the case, you may need a stepladder or other sturdy, safe device
to reach the “Learn” or “Smart” button on the garage door opener motor.
Programming the HomeLink
®
To Next Page
Loading...
Need help?
General
