Lexus NX 200 - Page 286

285
4
LEXUSNX300/NX200OwnersManualGeneralM78540en
4-5. Using the driving support systems
Driving
on the multi-information display.
1 Press “” or “” of the meter
control switches and select .
2 Press “” or “” of the meter
control switches and select .
3 Press on the meter control
switches to enable/disable the sys-
tem.
The PKSB OFF indicator comes on
when the Parking Support Brake
function is OFF (not operating).
When the Parking Support Brake func-
tion is switched OFF, system operation
does not resume until the function is
switched back ON through the set-
tings screen on the multi-information
display. (System operation does not
resume by operating the engine
switch.)
■ Engine output restraint control
When there is a static object, where a potential collision may occur, is detected, the
increase of the vehicle speed is restrained due to engine output being controlled.
Operation